Videos on how to CNC machine a relief in wood
Coat of Arms: DeskProto instruction videos for a 3D reliefThis great Coat-Of-Arms relief has been created by Todd Bailey of 4m3D as a custom model for DeskProto. We supply the model as a free download, hoping that machining this relief will make you appreciate the DeskProto software. Note that you can easily customize the model by adding graphics and text to the shield and the ribbon, as explained in the Tutorial videos below.
- 1. Coat of Arms relief geometry
- 2. Coat of Arms toolpaths (DP V7)
- 3. Coat of Arms toolpaths (DP V5)
- 4. Coat of Arms machining
- 5. Results showcase for the COA relief
1. Coat of Arms relief geometry
This relief has been created as a sample geometry for DeskProto users
The relief is available for download in two versions:
The file dpshield-flat-stl.zip is a 22 MB file, containing a 35 MB STL file of the relief with flat shield and ribbon surfaces, to be used with DeskProto Lite.
The file dpshield-domed-stl.zip is a 22.5 MB file, containing a 36 MB STL file of the relief with domed (curved) shield and ribbon surfaces, to be used with DeskProto Expert or Multi-Axis (in the Entry Edition it is not possible to project 2D toolpaths and bitmap toolpaths onto a domed geometry).
2. Coat of Arms toolpaths, DeskProto V7
Creating toolpaths for the Coat of Arms relief (DP V7, 17 min)
The Coat-Of-Arms relief video shows you how to create toolpaths for a complex relief geometry, using the free Coat of Arms STL file, combined with a bitmap image displayed on the shield and a text engraved on the banner below the shield. You can of course use your own image and your own text.
So this project uses all three types of CAD data that DeskProto can handle, combined in one part !
You can see the resulting toolpaths being used on the machine in the Coat of Arms machining video.
This video is in HD quality (1280x720 pixels).
Subtitles are available and can be switched on, in English and in Dutch.
3. Coat of Arms toolpaths, part 1 and 2
Creating toolpaths for the Coat of Arms relief (DP V5, 7.5 min)
The Coat-Of-Arms relief video (part 1) shows you how to create toolpaths for this same Coat of Arms relief, using the DeskProto Entry Edition.
It was made with DeskProto Version 5, so in fact it is obsolete now.
Customizing the relief with your own graphics and text (DP V5, 11 min)
Part 2 teaches you how to customize this relief by adding your own text to the ribbon and your own graphics to the shield. This video as well was made with DeskProto Version 5.
As the geometry of the relief is a free download, this lesson enables you to create a model for any purpose that you feel suited: a family crest, a sports prize, a employee prize - you name it.
4. Coat of Arms machining
Machining the Coat-of-Arms relief in walnut wood: using toolpaths as created in the tutorial video above (DP V5, 3 min)
The Coat-of-Arms video shows plain 3-axis machining, for a detailed relief geometry. Even more as details are added using bitmap operations and a 2D operation.
The four steps that are shown are:
- Roughing, 6 mm ballnose cutter
- Semi-finishing, 3 mm ballnose cutter
- Finishing, 2 mm ballnose cutter
- 2D text engraving, 1 mm flat cutter.
The relief is machined in walnut wood: looks great ! Take care though as walnut wood dust may cause allergic reactions.
5. Results showcase for the COA relief
A small relief in tooling board, 140x150 mm. Click on the left picture for a high-res version
These first two pictures show a small version of the flat Coat-Of-Arms relief (140 x 150 x 20 mm), made using DeskProto Lite as described in the video tutorial. A base has been added below the relief by loading a second STL file into the same DeskProto project. The bitmap relief is 'negative': has been created by removing material after first machining a flat shield. The model is machined in tooling board, you can click on the left picture for a high-res version.
A relief in walnut wood, 230x220 mm. Click on the right-side picture for a high-res version
The second Coat-Of-Arms is larger (230 x 220 x 11 mm), however machined without the base. This model has been machined in walnut wood, using four different cutters: roughing with a 6 mm diam ballnose, after that a 3 mm ballnose, and finally a 2 mm ballnose. All these toolpaths have been created in DeskProto Full using Bitmap operations. That was needed to create a positive relief, lying on top of the (domed) shield. The text finally was engraved using a flat cutter of 1 mm diameter.
The resulting model has been treated by special wood-oil and looks great !
The relief in transparent plastic. Front side left and back side right
We could not resist to create a third Coat-Of-Arms model, machined in the back side of a transparent material. Much smaller this time: ca 65 x 65 mm. The shield geometry has been converted to a cavity by selecting Inverse milling in DeskProto. Note that inverse milling will come with a 180 degree rotation, which also has to be applied to the bitmap and to the 2D text on the ribbon.
The picture on the shield is the Radetzky bitmap (Austrian field marshall Radetzky) that is one of the example files in every DeskProto setup.
Machined in wood (beech and mahogany) by Rudolf Thiele from Germany
Thiele Holz from Wurzen (Germany) produces wooden articles and artworks. Herr Thiele machined this Coat-Of-Arms relief for his own use: the letters A.R.T. being initials.
The relief model was done using DeskProto, without 2D operation or bitmap operation. The letters were separately machined, using 2D toolpaths, and have later been glued onto the relief model.
Email us a photo of the Coat of Arms relief that you created so we can add that to the list of results !
(in case you want with a link to your website).
It will be interesting to see which machines are used, which cutters, and also which fixtures for three sided ring machining.